Compared with ordinary die forging and split die forging, Multi-directional die forging machine has the following technical and economic characteristics:

1. It can form forgings with complex structural shapes, significantly improve material utilization and reduce machining hours. It has been proved by practice that multi-directional die forging can obtain highly complex shapes, accurate dimensions, no flash, no forging slope and with Forgings with cavities, shapes and dimensions as close as possible to the dimensions of the finished part, thereby significantly improving the material utilization of the part. Multi-directional die forging machine manufacturers tell you to reduce machining hours and significantly reduce forging costs.
2. It helps to improve its mechanical properties. From the low-magnification inspection results of a large number of multi-directional die forgings, it can be seen that the metal flow lines of multi-directional die forgings are distributed along the contour of the forgings, which helps to improve the mechanical properties of forgings. In addition, due to multi-directional Die forging does not produce flash, that is, there is no problem of exposing the end of the flow due to trimming, which is especially important for the corrosion resistance of parts. The Multi-directional die forging machine manufacturer tells you that the application range of the multi-directional die forging process is expanded to the forging of materials with narrower temperature and lower plasticity. For such a material with narrow temperature and low plasticity, the forging may crack and be scrapped due to the presence of tensile stress during ordinary forging. However, during multi-directional die forging, the blank is always in a strong three-dimensional stress state. , the plasticity of the metal is high, and even the metal material that is difficult to deform may withstand forging deformation.
3. The mold structure is simple, the service life is long, the manufacturing cost is low, the use and maintenance are convenient, the cooling and lubrication effect of the mold is good, so the service life of the mold of the Multi-directional die forging machine is relatively high, which is not only conducive to improving production efficiency, but also Reduce the production cost of forgings.