Red pier machine is widely used in the forging processing of automobiles, trains, ships, aviation, mining machinery, petroleum machinery, hardware tools and other industries. It is an indispensable high-precision forging equipment for modern forging producers.

The basic principle of the red pier machine is that the main motor drives the slider through the transmission device to form alternating up and down movements, and the stamping process is completed in sequence. This principle also determines the moving parts of the punch during operation, and the drive assembly generates a lot of heat. In this case, the Red pier machine needs to be lubricated, but what should be paid attention to when oiling the Red pier machine?
According to the manufacturer of the Red pier machine, the lubrication operation before starting needs to be lubricated with a manual pump, and then the operation can be supplemented. When the Red pier machine is turned off after more than twenty-four hours, the hand pump can be used for bidirectional lubrication and normal lubrication operation, and then the output power can be replenished.
When replenishing oil or grease manually, please turn off the power of the printing machine first. When using chain grease, please check the tightness of the chain and readjust it with the sprocket if necessary. Three months after the new Red pier machine was put into operation, the lubricant in the gearbox was changed. After replacement, replace it every six months and clean the tank.